Drivers & Software

i1400 Scanner Drivers

i1400 Scanner Drivers

Installing the scanner drivers from the link on the bottom of this page will install the latest Smart Touch drivers for the i1400 Series Scanners. These drivers will also support the KODAK A4 Flatbed and A3 Scanner when attached to a KODAK i1400 Series Scanner. The KODAK i1400 also now supports the KODAK Legal Flatbed. These drivers can be found on the Flatbed Driver page. 

Note: If you are using Kofax VRS with an i1420 or i1440 Scanner, please follow these instructions. Download .pdf file with instructions 

TWAIN / ISIS Drivers tested on: 

  • WINDOWS XP Pro SP2/SP3 (32-bit)
  • WINDOWS XP x64 edition SP2
  • WINDOWS VISTA SP1/SP2 (32-bit and 64-bit)
  • WINDOWS 2003 SERVER x64 Edition
  • WINDOWS 7 (32-bit and 64-bit) SP1
  • WINDOWS 8 (32-bit and 64-bit) 

Dependencies: Microsoft .Net 2.0 and Microsoft Installer 3.x 

Linux distributions which are fully supported on 32-bit Operating Systems (user interface requires Mono Version 1.26 or higher): 

  • Ubuntu 8.06+
  • Fedora 9+
  • SUSE 11.1+ 

Software Driver CD version 3.09 (Windows) and version 3.09 (Linux) included with the latest SVT- October, 2013 

New Release Notes (English only)

Note: When installing i1400 or the Flatbed drivers for the first time: 

  • DO NOT connect or power on the scanner or the flatbed to the host PC until the SVT has been installed.
  • DO NOT uninstall the previous Versions of this Device Driver installation, as this will update the current installation.
  • Shutdown all applications, as the PC will require a reboot to finalize the installation. This will ensure Microsoft's plug and play technology will properly recognize the Scanner or Flatbed. 

User guides are not installed with this download, please see the user guide section of this web site for the latest version. The Smart Touch application is not part of this download, only the drivers needed to run Smart Touch are supplied. For updated Smart Touch drivers, click on the "View All Drivers & Downloads" button at the top of page. 

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. 

Note: Expand the above (e.g. tar -zxf*.gz) and then run the setup script 

Important: After upgrading the software, the scanner may need to be power cycled 

i1405 Kofax VRS Support 

The Kodak i1405 Scanner has been certified by Kofax with the following VRS versions: 

For more information see the Kofax Scanner Configurator

Install SoftwareISIS DriversLinux Software

TWAIN Integrator Kit

TWAIN Integrator Kit

The Kodak TWAIN Integrator Kit contains contains information required to write TWAIN enabled applications for Kodak Alaris' document scanners. This documentation includes custom capablities and header files for the Kodak Data Source. This file also contains information on the custom properties exposed by Kodak Alaris' WIA driver. 

By downloading from Kodak Alaris, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

Download

Operating Systems

Operating Systems

Operating System Compatibility Definitions 

Supported – Kodak Validated 

  • Windows XP SP2 and SP3 (32-bit ) 
  • Windows XP x64 Edition SP2 
  • Windows Vista SP1 (32-bit and 64-bit) 
  • Windows 7 (32-bit and 64-bit) 
  • Windows 8 (32-bit and 64-bit) 
  • Linux Ubuntu 8.04* 
  • Linux Fedora 9* 
  • Linux SUSE 11* 

*Smart Touch does not work on these Operating Systems

Specifications

Recommended Daily Volume

i1405: Up to 9,000 pages per day, i1420: Up to 12,000 pages per day, i1440: Up to 15,000 pages per day

Throughput Speeds Hover over me Throughput speed may vary depending on your choice of driver application software, operating system, PC and selected image processing features.

200 dpi landscape, letter-size, B/W, grayscale, color, i1405 Up to 45 ppm/90 ipm, i1420 Up to 60 ppm/120 ipm, i1440 Up to 75 ppm/150 ipm (speeds vary with driver, application, OS, and PC)

Scanning Technology

i1405/i1420/i1440 dual CCD Grayscale output bit depth: 256 levels (8-bit) Color capture bit depth: 48 bits (16x3) Color output bit depth: 24 bits (8x3)

Optical Resolution

600 dpi and optional A3 flatbed accessory

Illumination

Dual fluorescent (cold cathode)

Output Resolutions

75, 100, 150, 200, 240, 250, 300, 400, 600, and 1200 dpi

Maximum Document Size Hover over me The maximum document size supported by the scanner will vary based on the output image resolution and image compression used.

297 mm x 863 mm (11.7 in. x 34 in.), i1440 long document mode: 254 mm x 6.1 m (10 in. x 240 in.)

Minimum Document Size

64 mm x 89 mm (2.5 in. x 3.5 in.)

Feeder Capacity

Up to 150 sheets of 60 g/m² (16 lb.) paper

Multi-Feed Detection

Ultrasonic technology

Bundled Software Hover over me Choose one and download from the web

TWAIN, ISIS, SANE, Windows Imaging Architecture Drivers, Kodak Capture Desktop Software, Smart Touch

Perfect Page Features

Adaptive threshold processing Hover over me Not available when scanning with AQIST for FADGI compliant images

Aggressive cropping Hover over me Not available when scanning with AQIST for FADGI compliant images

Autocrop

Deskew

Dual stream scanning

Electronic color dropout Hover over me Not available when scanning with AQIST for FADGI compliant images

Interactive color, brightness and contrast adjustment

iThresholding Hover over me Not available when scanning with AQIST for FADGI compliant images

Relative cropping Hover over me Not available when scanning with AQIST for FADGI compliant images

Sharpening Hover over me Not available when scanning with AQIST for FADGI compliant images

Streak filtering

i1440 only Segmented B/W images, auto photo cropping, trainable electronic color dropout, Multiple electronic color dropout, long document mode, toggle patch adjustment, Automatic orientation, automatic color detection, background color smoothing

File Format Outputs

Single and multi-page TIFF, JPEG, RTF, PDF, searchable PDF

Imprinting

Post-scan document imprinter (i1420/i1440)

Accessories and Consumables

Kodak A3 flatbed accessory (black background) with 1.8-meter (6 ft.) cable

Feed module, separation module, feed rollers, roller cleaning pads, Staticide Wipes, image guides, pre-separation pad, inkjet cartridge holder, inkjet cartridges, ink blotters

Electrical Requirements

100-240 V; 50-60 Hz; universal power supply included

Power Consumption

Running: <60 watts, Scanner with A3 flatbed: Sleep mode: <6 watts; Running: <70 watts

Environmental Factors

Operating temperature: 15–35° C (59–95° F)

Operating humidity: 15–76% RH

PC Configuration

Intel Core2, 2 GHz duo processor or equivalent, 2 GB RAM

i1440 long document mode: Intel Core2, 2 GHz duo processor or equivalent, 4 GB RAM

Acoustical Noise

Standby mode: <22 dB(A), Operating mode: <57 dB(A)

Approvals and Product Certifications

AS/NZS 3548 Class B (C-Tick Mark), CAN/CSA-C22.2 No. 60950 (C TUV Mark), Canada ICES-003 Issue 3 (Class B), GB4943, GB9254 (Class B), GB 17625.1 Harmonics (CCC "S&E" Mark), EN 55022 ITE Emissions (Class A), EN 61000-3-2 Harmonics

EN 61000-3-3 Flicker, EN 55024 ITE Immunity (CE Mark), EN 60950 (TUV GS Mark), IEC 60950, CISPR 22 Class B, VCCI (Class B), CNS 13438 (Class B and BSMI Mark), UL 60950 (TUV US Mark), CFR 47 Part 15 Subpart B (FCC Class B), Argentina S-Mark

Dimensions and Weight

Weight: i1405/i1420/i1440: 10.4 kg (23 lbs.)

Depth: 30 cm (11.8 in.)

Width: 54.7 cm (21.5 in.)

Height: 36.5 cm (14.4 in.)

FAQs

Latest product insights
Maintaining
What supplies and consumables are available for scanners from Kodak Alaris?

For information about available materials, see the Supplies and Consumables Catalog for scanners from Kodak Alaris.

Data Security

Protecting Customer Information — Scanners from Kodak Alaris process scanned data exclusively through volatile memory ensuring image data is effectively erased upon shut down.

This scanner contains non-volatile storage (NVRAM), and volatile memory (SDRAM).

Volatile memory is used to store customer image data. It is erased when the device is turned off.

Non-volatile memory is used to store program data, scanner settings, and scanner calibration data. No customer image data is stored in non-volatile memory.

The only scanner settings stored permanently are the Energy Star settings. No other customer data is stored in the non-volatile memory.

NOTE: The image data is passed to a PC which has its own ability to store images and information. The customer will also need to consider what precautions must be taken to secure the data on the PC.

Ask a Question 

Have a question? Fill out the information and someone will contact you soon.