Drivers & Software

i1800 Series Scanner Firmware

i1800 Series Scanner Firmware

A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is recommended. Please read the information at the above link for more information.

Firmware Installation Instructions:

NOTE: DO NOT ATTEMPT TO INSTALL AN i1800 FIRMWARE UPDATE FROM A WINDOWS 7 HOST PC.

If the computer that is connected to the KODAK i1800 Scanner is using any version of the Microsoft Windows 7 operating system and you need to install any version of Kodak firmware into the scanner then please contact Kodak Support for assistance. For more information on this topic please read the firmware release notes below.

  1. Click on the download button below and save to a temporary directory on your computer.

  2. Before beginning your update, be sure the scanner is powered on and has reached steady state with no warning or error messages. Exit out of any application which may be communicating with the scanner.

    Note: When you launch the InstallFW program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.

  3. Double-click on the downloaded file in your temporary directory.

    Note: The operator control panel on the scanner will report progress of the download. It will show 0-100% several times as the download contains more than one file. DO NOT cycle power on the scanner until the application reports complete.

  4. When download is completed, cycle power on the scanner.
  5. Version number of the FW on the scanner can be confirmed using the Information key on the operator control panel.

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

Download

i1800 Series Scanner Driver

i1800 Series Scanner Driver

Installing the scanner drivers from the link on the bottom of this page will install the latest SVT (Scanner Validation Tool), TWAIN Data Source, the latest ISIS Driver, and the latest WIA/STI drivers for the i1800 Series Scanners.

Operating System tested on:

  • WINDOWS XP Pro
  • WINDOWS Vista (32 bit only)

  • WINDOWS 7 (32 bit and 64bit)

Note: When installing a KODAK Firewire scanner with Windows 7 use of the the Legacy Windows Firewire card driver is required. View the document below which provides step by step instructions on how to use and install the Legacy Firewire card drivers:

Software Driver Versions CD 1.33 Release Notes

All i1800 Series Scanners should be brought up to this level of Host Software, and the Firmware MUST be updated to v2.4.0 or higher after the new SVT is installed.

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

Download

ISIS Driver Update

This updated ISIS driver has been developed and tested by Pixel Translations (a Captiva Company) for use with all ISIS enabled host applications. This driver will be incorporated in to the Kodak "InstallSoftware_i1800..." package in a following release. The following Release Notes detail the changes in this update. For new installs the "InstallSoftware_i1800..." package should be installed first. To update to this new ISIS driver, unZip all files to a folder on the Scanner host PC and execute setup.exe. 

Download

Brightness and Contrast Control

Brightness and Contrast Control

The Brightness and Contrast Control allows the user to create custom color tables which can be downloaded to this scanner, providing more flexibility and ease of use.

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.

Download

i1860 Kofax VRS Support

i1860 Kofax VRS Support

The Kodak i1860 Scanner has been certified by Kofax with the following VRS versions:

For more information see the Kofax Scanner Configurator.

Download

TWAIN Debug Log Creation

TWAIN Debug Log Creation

The following PDF instructions can be used to collect a detailed Scanner and TWAIN debugging log set. The TWAIN logs should be helpful for any TWAIN integrator. The scanner-specific logs must be interpreted by Kodak Rochester Development support.

ISIS Debug Log Creation

ISIS Debug Log Creation

The following PDF instructions can be used to collect a detailed Scanner and ISIS debugging log set. The ISIS logs should be helpful for any ISIS integrator. The scanner specific logs must be interpreted by Kodak Rochester Development support.

Increasing the Scanner Log History of KODAK Scanners

Increasing the Scanner Log History of KODAK Scanners

Operating System Compatibility

Operating System Compatibility

Operating System Compatibility Definitions

Supported – Kodak Validated

  • Windows 2000
  • Windows XP Pro SP2/SP3 (32-bit)
  • Windows Vista (32-bit )
  • Windows 7 (32-bit )1,2
  • Windows 7 (64-bit)1,2

Not Supported – Not Validated

  • Windows 8.x (32-bit)
  • Windows 8.x (64-bit)
  • Windows 10 (32-bit)
  • Windows 10 (64-bit)

Notes:

  1. Requires use of "legacy" IEEE 1394 (Firewire) device driver
  2. Firmware download not supported on Windows 7 host PC
  3. There is an untested SANE backend for this scanner (www.sane-project.org)

Register Your Scanner

Register your scanner to ensure you get the most out of your investment.

FAQs

Latest product insights
Maintaining
What supplies and consumables are available for scanners from Kodak Alaris?

For information about available materials, see the Supplies and Consumables Catalog for scanners from Kodak Alaris.

Data Security

Protecting Customer Information — Scanners from Kodak Alaris process scanned data exclusively through volatile memory ensuring image data is effectively erased upon shut down.

This scanner contains non-volatile storage (NVRAM), and volatile memory (SDRAM).

Volatile memory is used to store customer image data. It is erased when the device is turned off.

Non-volatile memory is used to store program data, scanner settings, and scanner calibration data. No customer image data is stored in non-volatile memory.

The only scanner settings stored permanently are the Energy Star settings. No other customer data is stored in the non-volatile memory.

NOTE: The image data is passed to a PC which has its own ability to store images and information. The customer will also need to consider what precautions must be taken to secure the data on the PC.

Supplies & Consumables

Contact your Reseller to purchase supplies and consumables. If you don't know who your reseller is, please complete the Ask a Question form.

Supplies & Consumables Catalog

Ask a Question 

Have a question? Fill out the information and someone will contact you soon.