i250/i260/i280 Scanner 

Install Software and Brightness Controls

Installing the scanner drivers from the link on the bottom of this page will install the latest SVT (Scanner Validation Tool), TWAIN Data Source and the latest ISIS Driver for the i200 Series Scanners. 

All i200 Series Scanners, with or without the Flatbed Accessory, should be brought up to this level of Host Software, and the Firmware MUST be updated to v 2.5.5 i200 Firmware after the new driver is installed. If this isn't done the scanner will not work properly. 

Software Driver CD Version 3.18 included with the latest SVT - July 2007 

i250, i260 and i280 Scanner: 

• ISIS driver 1.1.10506.20001
• SVT 5.24
• TWAIN v6.65.8
• STI driver v2.5 (signed) 

IMPORTANT NEW FEATURES OF THIS SOFTWARE 

• Adds the ability to accept custom color tables created with the Brightness and Contrast Control.
• Adds iThresholding feature to the i250 and i260 scanners.
• Allows the i280 to scan as a single image documents up to 34" long.
• After SVT is installed, a reboot is required.
• SVT will no longer overwrite newer versions, you MUST UNINSTALL to load "older" versions. 

By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual file size for multilanguage downloads may vary. 

Brightness and ContrastInstall SoftwareWin 7 64 bit TWAIN

Integration

The Kodak TWAIN Integrator Kit contains contains information required to write TWAIN enabled applications for Kodak Alaris' document scanners. This documentation includes custom CAPablities and header files for the Kodak Data Source. This file also contains information on the custom properties exposed by Kodak Alaris' WIA driver. 

By downloading from Kodak Alaris, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary. 

Download

Operating System Compatibility

Operating System Compatibility Definitions 

Supported – Kodak Validated 

• Windows 98SE
• Windows ME
• Windows 2000
• Windows XP Pro SP2/SP3 (32-bit and 64-bit)
• Windows Vista SP1 (32-bit and 64-bit) 

Not Supported – Customer Validated 

• Windows 7 SP1(32-bit and 64-bit) 

Not Supported – Not Validated 

• Windows 95
• Windows NT
• Windows 2003 Server x64 Edition
• Windows 2008 Server x64 Edition
• Windows 8.x (32-bit)
• Windows 8.x (64-bit)
• Linux
• Mac 

NOTES: 

FOR Windows 98SE ONLY, USE THIS UNINSTALL PROCEDURE 

1. Run the Uninstaller (Note: For all other Operating Systems, the Uninstall is complete and correct, go to step 8)
2. Delete the following directory/folder and any sub-directories/folders: C:\windows\twain_32\kodak\kds_i200
3. Delete the following directory/folder and any sub-directories/folders: C:\Program Files\Kodak\Document Imaging
4. Delete file: C:\windows\system\kdssti.dll
5. Delete file: C:\windows\inf\other\kdssti.inf (Note: inf is a hidden directory)
6. Delete file: C:\windows\system32\drivers\kdsmm.sys
7. Delete files: C:\windows\PIXTRAN\Eki200*.*
8. Restart Windows
9. Install the required version of SVT 

FOR Windows 7 32-bit ONLY, USE THIS PROCEDURE 

Accessing Device Manager and Device list: 

1. Right click the Computer icon
2. Select Manage from the list that pops up. The Computer Management window will appear
3. Select Device Manager from the list on the left of the window
4. Double click "IEEE 1394 Bus host controllers" from the device list.
5. Verify driver files:

• If the device name is "1394 OHCI Compliant Host Controller (Legacy)", verify the correct files are installed. Otherwise proceed to Installation of Driver Files below. 

Driver Verification 

1. Double click the "1394 OHCI Compliant Host Controller (Legacy)", device name. The controller properties window will open.
2. Select the Driver tab.
3. Left click Driver Details button from the window.
4. Check that the Driver files list shows 2 files: 1394bus.sys and ohci1394.sys
5. If these are the current driver files, you may close out of Computer Management and proceed with testing. If not, close the Driver Details window and continue with the Installation of Driver Files step 2. 

Installation of Driver Files: 

1. Double click the 1394 host controller device name. The controller properties window will open
2. Select the Driver tab. Click the Update Driver button
   1. Select "Browse ..... software". Click Next
   2. Select "Let me ..... computer". Click Next
   3. Highlight "1394 OHCI Compliant Host Controller (Legacy)" in the driver list. Click Next
   4. Close the installation finished window when it appears
   5. Click the Driver Details button from the Properties window
   6. Verify the files 1394bus.sys and ohci1394.sys are listed
   7. Close the properties and management windows.