Access Partner PortalRegister Your Scanner
Register your scanner to ensure you get the most out of your investment.
Drivers & Software
- i5000V Series Scanner Drivers
- i5000 Series Scanner Firmware
- Which firmware file do you need?
- Operating System Compatibility
i5000V Series Scanner Drivers
i5000V Series Scanner Drivers
Included on this page is the driver for the i5000V Series Kofax VRS scanner, along with the release notes.
Software Driver Versions CD 4.4 Release notes (pdf - English)
By downloading from Kodak Alaris, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.
i5000 Series Scanner Firmware
i5000 Series Scanner Firmware
A new version of the Scanner Driver may also be available. Firmware can be upgraded without updating the Scanner Driver but loading the most recent version of the Scanner Driver is recommended. Please read the information at the link below for more information.
Installation Instructions:
- Click on DownloadFirmware_i5000_XX_Series_v0x.x.x.exe and download to a temporary directory on your computer.
- Before beginning your update, be sure the scanner is powered on and has reached steady state with no warning or error messages. Exit out of any application which may be communicating with the scanner. Note: When you launch the DownloadFirmware program, it will automatically connect to the scanner and begin a FW download. DO NOT interrupt this process until the program reports back successful completion.
- Double click on the file, DownloadFirmware_i5000_XX_Series_v0x.x.x.exe.
- When download is completed, cycle power on the scanner.
The current Firmware version of your scanner can be checked from the Kodak i5000s scanners Operator Control Panel under the Information option or by launching the "Scanner Validation Tool" (SVT) program found in the Start > All Programs > Kodak Document Imaging program group. Then choose the TWAIN driver, Setup, Settings, Device, Diagnostics, Logs.
By downloading from Kodak, you agree to the terms & conditions outlined in the license agreement. Actual filesize for multilanguage downloads may vary.
Which firmware file do you need?
Which firmware file do you need?
- i5200/i5600/i5800: DownloadFirmware_i5000_00_Series v0x.xx.xx.exe
- i5200V/i5600V: DownloadFirmware_i5000_00_Series v0x.xx.xx.exe
- i5250/i5650/i5850 with firmware version 4.3.00 or greater: DownloadFirmware_i5000_50_Series v0x.xx.xx.exe
(If in doubt, you can try both . . . only one will work and no harm will be done.)
NOTE: With the firmware 4.3.0 and higher installed, the Kodak i5000 scanners will have separate installer packages for the i5x00 and i5x50 models. The firmware installer file will now have "00" in the file name to denote that it will install on an i5x00 scanner (i5200/i5200v/i5600/i5600v/i5800) or it will have a "50" in the file name to denote that it will install on an i5x50 scanner (i5250/i5650/i5850). If a Kodak 5x50 scanner is updated to firmware 4.3.0 or higher, the firmware installer must have a "50" (DownloadFirmware_i5000_50_Series_v0x.xx.xx.exe) in the name or it will not install.
Operating System Compatibility
Operating System Compatibility
Operating System Compatibility Definitions
Supported – Kodak Validated
- Microsoft Windows Vista (32- and 64-bit)
- Microsoft Windows 7 (32- and 64-bit)
- Microsoft Windows 8 (32- and 64-bit)
- Microsoft Windows 8.1 (32- and 64-bit)
- Microsoft Windows 10 (32- and 64-bit)
Specifications
| Throughput Speeds Hover over me Throughput speed may vary depending on your choice of driver application software, operating system, PC and selected image processing features. |
140 ppm / 280 ipm |
| Recommended Daily Volume |
Unlimited |
| Scanning Technology |
Dual CCD; Grayscale output bit depth is 256 levels (8-bit); color output bit depth is 24 bits (8 x 3); color capture bit depth is 48 bits (16 x 3) |
| Image Output Resolution Options |
Up to 600 dpi Hover over me Supported DPI: 100, 150, 200, 240, 250, 300, 400, 500, 600 |
| Minimum Document Size |
63.5 mm x 63.5 mm (2.5 in. x 2.5 in.) |
| Paper Thickness and Weight |
45-200 g/m² (12-110 lb.) paper |
| Feeder Capacity |
Up to 750 sheets of 80 g/m² (20 lb.) paper |
| Connectivity |
USB 2.0 Hover over me This product has been tested and certified by USB.org USB 3.2 Gen 1x1 Compatible Hover over me USB 3.2 Gen 1x1 = USB 3.1 Gen 1 = USB 3.0 (5Gbps) |
| Perfect Page Features |
Color-on-the-fly toggle patch Hover over me Not available when scanning with AQIST for FADGI compliant images |
| File Format Outputs |
JPEG Hover over me Native scanner and driver file format Not available when scanning with AQIST for FADGI compliant images |
| Electrical Requirements |
100-240 V (International); 50-60 Hz |
| Power Consumption |
Running: less than 205 watts Standby: less than 1 watt |
| Environmental Certification |
2008 EuP ENERGY STAR Qualified EPEAT Silver |
| Acoustical Noise |
Scanning: <56 dB(A) Standby mode: <39 dB(A) |
| Recommended PC Configuration |
INTEL QUAD CORE i5 (Ivy Bridge or newer), running @ 3.0 GHz or higher |
| Accessories and Consumables |
Feeder Consumables Kits Imaging Guide Set Printer Ink Cartridge and Carrier Roller Cleaning Pads Switchable Background Transport Cleaning Sheets |
| Dimensions and Weight |
|
Manuals & Guides
FAQs
Latest product insights
Maintaining
How do I obtain consumables?
To determine the consumables that are needed please reference the consumable catalog.
What supplies and consumables are available for scanners from Kodak Alaris?
For information about available materials, see the Supplies and Consumables Catalog for scanners from Kodak Alaris.
How To
Data Security
Protecting Customer Information — Scanners from Kodak Alaris process scanned data exclusively through volatile memory ensuring image data is effectively erased upon shut down.
This scanner contains non-volatile storage (NVRAM), and volatile memory (SDRAM).
Volatile memory is used to store customer image data. It is erased when the device is turned off.
Non-volatile memory is used to store program data, scanner settings, and scanner calibration data. No customer image data is stored in non-volatile memory.
The only scanner settings stored permanently are the Energy Star settings. No other customer data is stored in the non-volatile memory.
NOTE: The image data is passed to a PC which has its own ability to store images and information. The customer will also need to consider what precautions must be taken to secure the data on the PC.
Supplies
Contact your Reseller to purchase supplies and consumables. If you don't know who your reseller is, please complete the Ask a Question form below.
Ask a Question
Have a question? Fill out the information and someone will contact you soon.
Quick link button
contact_support
Contact Us
Contact Us
important_devices
Demo Request
Demo Request
arrow_upward
Back to top
